Frequentily asked questions
Where is Microjig located?
Our headquarters is located in Winter Park, FL. Our manufacturing plants and fulfillment centers are located around the globe.
Do you offer a military or education discount?
Yes, we offer discounts for both active duty or retired military personnel, and discounts for career training educators. Contact us to submit a request.
How do I find out about new products?
Stay in the loop about new products by signing up for our newsletter.
How many products does Microjig have?
Currently, we have seven different product lines, and we are always working on expanding and improving our current fleet of products.
- GRR-RIPPER: Our flagship products are the GRR-RIPPER Basic (GR-100) and Advanced (GR-200) models. Now available in a variety of bundles with a full line of accessories. Learn More
- GRR-RIP BLOCK: Our Smart Hook Pushblock is armed with our signature high-friction, non-slip Green GRR-Rip material, and the auto-retracting Smart Hook technology. Learn More
- MICRODIAL Tapering Jig: Our revolutionary tapering jig with indexed, preset angles for precise, repeatable tapers. Make tapered legs for that sofa table you’ve always wanted. Use with your existing GRR-RIPPER Advanced model and make smart tapers. Learn More
- ZEROPLAY Miter Bars and Stops: Top-down installation, universal miter bar size with One-Touch Calibration. The ZEROPLAY Miter Bar was designed for shop-made jigs, sleds and fixtures. The only limit of this miter bar is your own imagination. Learn More
- MJ SPLITTERS: The #1 aftermarket splitter system. Easily installs on a table saw’s zero-clearance insert in place of a riving knife. Keeps the kerf open to prevent kickback and give you superior cut quality. Learn More
- MATCHFIT: Our line of clamps and hardware, universally compatible with a standard ½” 14-degree dovetail profile. It offers all the functionality of t-track and t-track accessories as a fraction of the cost. Simply route your own tracks to make every inch of your shop more functional. Learn More
- BLADEMATCH Arbor Shims: A set of 6 shims that install between your table saw’s arbor and blade to maintain a constant cut line regardless of blade thickness. Adjusts .003-.045” in .001” increments, keeping your riving knife aligned and your fence scale accurate. Learn More
Where can I buy Microjig products?
Our products are available with free shipping from our online store, in many stores nationwide, and through authorized retailers online.
I'd like to join the team. Any chance you’re hiring?
We’re always looking for talented people to join our team! See our available openings.
How can I return a product?
We apologize if you're unhappy with your purchase. Please contact us to see if there's anything we can do to resolve your issue. If you'd still like to make a return, visit the Shipping & Returns page for more info.
Is the GRR-RIPPER OSHA compliant?
Yes. OSHA regulations state that “...in a workplace, regulations require that unsafe saws be removed from service immediately, push sticks or push blocks be provided at the work place for guiding or pushing material past the blade, and emphasis be placed on the cleanliness around woodworking machinery and, in particular, the effective functioning of guards and prevention of fire hazards. 29 CFR1910.213(s)
Where can I buy the GRR-RIPPER in Australia?
Please take a look at our Find a Retailer page and scroll to the bottom and click “International Retailers” to see a list of our Australian dealers near you. Many outside retailers also offer shipping to Australia.
How can I get replacement legs for my GRR-RIPPER?
They’re available for purchase in-store or at an authorized online retailer. Shop Now or Find a Retailer
What is the widest board the GRR-RIPPER will cut on a table saw?
Please click to watch the video for cutting wider stock. Download Instructions
I have missing parts for my GRR-RIPPER, what do I do?
We’re so sorry about that. Please call 1-855-RIP-SAFE (747-7233) or contact us here with the missing parts and the quantity you need.
Can I use the 1/8" Leg with the GR-100?
Yes! In fact, the 1/8″ Leg fits all existing GRR-RIPPER models.
How do I use the GRAK-404 Upgrade Kit for the GRR-RIPPER?
Here’s a short video showing many of the great uses for the GRAK-404 Upgrade Kit AKA the Stabilizing Plate and Adjustable Spacer.
Why would I need two GRR-RIPPERs?
We recommend using two GRR-RIPPERs when cutting stock longer than your table saw top. In order for the GRR-RIPPER to work properly, it needs to be on top of the material, with the material on the table stop. If you stop feeding material to reposition your GRR-RIPPER, the saw blade will leave blade marks and burning. With two GRR-RIPPERs, you can feed stock continuously using the hand-over-hand method, resulting in better cut quality.
Can I use the GRR-RIPPER with the blade guard on my table saw?
The GRR-RIPPER passes over the blade so there can’t be anything in the way. Don’t worry, the GRR-RIPPER is your moving blade guard.
Will the GRR-RIPPER work on my table saw?
It will work on any standard table saw with a fence and a blade.
My GRR-RIPPER doesn’t seem as grippy as it used to - what gives?
Over time, dust and other contaminants can build up and compromise the effectiveness of the Green GRR-RIP material. Cleaning the gripping surface with denatured alcohol should restore your GRR-RIPPER to its original glorious grippy-ness. In rare cases, prolonged exposure to sunlight can damage the gripping material, so keep it out of direct sunlight.
I have a GRR-RIPPER with black parts - will yellow replacement parts fit?
Yes - the design is exactly the same. Black and yellow GRR-RIPPER parts are interchangeable.
Will the GRR-RIPPER trip the sensor on my Sawstop?
No. The plastic material will not trigger the safety mechanism on Sawstop saws.
I cut into my GRR-RIPPER, now what?
Every part of the GRR-RIPPER is individually replaceable, and compatible with all GRR-RIPPER models. Browse and swap out any damaged part with a replacement.
The GRR-RIPPER is made of specially formulated high-impact plastics for good reason. It maintains its shape and rigidity, but also absorbs force if it makes contact with the blade. In other words, it won’t shatter or break your wrist.
How do I open the router bit case?
How wide of a dado can I cut with the Dado Stop?
The Dado Stop can cut dados from ⅛” to ⅞” using a full kerf blade, and up to 1-13/16” using a stacked dado blade set.
How long of a dado can I cut with the Dado Stop?
It depends on the saw. The Dado Stop is designed to make crosscut dados using a miter gauge. You must be able to register off of Leg 3 with your miter gauge in the miter slot, and without your workpiece in front of the blade without touching it.
Will ZEROPLAY Miter Bars fit my saw?
ZEROPLAY Miter Bars will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0.73" and 0.79" wide and at least 5/16" deep.
Compatible miter tracks include but not exclusive to ShopSmith, SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.
*Not compatible with table saws with 'Tabs' cast into the top of the miter slot or 5/8" miter slots i.e. Ryobi or Craftsman.
My table saw has tabs at the top of the miter slot. Will ZEROPLAY Miter Bars work on my saw?
No. The tabs will get in the way. Refer to the compatibility diagram here:
I’m having trouble adjusting my miter bars - either too tight or too loose. Any tips?
If your miter bar fits well but becomes too tight when installed on a sled, you may have tightened the panhead screws too much. Overtightening those screws can cause the bars to compress and expand outward. Try putting a single strip of paper on the inside of one of the miter slots when adjusting the miter bars’ width. This should offset the compression that occurs during installation.
Does the ZEROPLAY 360 Sled Kit include the sled?
No. The kit is designed to allow users to build their own sled, to their own specifications. Don’t worry, you can do it! We provide detailed, easy-to-follow instructions for building the sled of your dreams. Believe in yourself.
Do the ZEROPLAY 360 Sled Kit or single miter bar kit include the ZEROPLAY Miter Stop?
No. The Miter Stop is included with the double miter bar pack, and is also available individually.
Does the ZEROPLAY Miter Bar work with Shopsmith® miter tracks?
It depends. The miter slots vary in width from model to model. Measure your miter slot to ensure that it is at least .730" wide"
I accidentally cut the Smart Hooks off - what now?
You don’t need to replace the whole GRR-RIP BLOCK! Just pop out the damaged ones and pop in the new ones. Contact us for replacements.
What is the difference between the GRR-RIP BLOCK and the GRR-RIPPER?
The GRR-RIPPER is designed for adjustability, whereas the GRR-RIP BLOCK was designed for simplicity, and pure traction. They feature the same GREEN GRR-RIP material, but the GRR-RIP BLOCK has a solid, much broader gripping surface and auto-retracting Smart Hooks. It’s ideal for use on the jointer, the router table, and on the bandsaw. It can be used on the table saw, but only for non-thru cuts or cuts that don’t require passing directly over the blade.
On what tools can I use the MICRODIAL??
The MICRODIAL is most commonly used on the table saw, but it can also be used on the router table and the bandsaw, if you have a fence on the right side of the blade. For more information about how to use the MICRODIAL, please refer to the instruction manual.
Do I need a GRR-RIPPER in order to use the MICRODIAL?
The MICRODIAL was designed to work with the GRR-RIPPER, but it depends on the cut. To cut tapers on wide panels, you can help feed the material with your other hand, provided it’s no less than 12” from the blade. To cut tapers on small or narrow stock, we strongly recommend using GRR-RIPPER(s) to safely feed material through the cut. This is not only safer, but will give you better results.
What is the maximum length I can cut?
It depends on the saw. The MICRODIAL cuts tapers by running along the fence. It must have enough of its edge in contact with the fence to remain straight from the start of the cut, with the Heel Hook at the tail end of your workpiece, and with your workpiece in front of the blade without touching it.
How much space behind the blade do I need?
My zero clearance insert is phenolic. Can I still install SPLITTERs?
Yes! However, the installation process is slightly different to account for the density of the material. Watch this video to see how SPLITTERs are installed on a phenolic zero-clearance insert.
Will the MJ SPLITTERs fit on my zero-clearance insert?
With the blade at maximum height, you need a minimum of 2” behind the blade to install the SPLITTERs.
Will the MJ SPLITTER SteelPro fit in the original MJ SPLITTER holes I've drilled?
No, it won’t. The SteelPro needs its own separate drilling guide and its spacing is different than the original MJ SPLITTER.
Does the MJ SPLITTER system work with 12" Saw blades?
Yes, please download and read the instructions.
What if I get my blade(s) sharpened?
Sharpening a saw blade will certainly affect the kerf it cuts. Adding Arbor Shims to offset the difference will ensure accuracy of the fence scale and mitigate the dangers associated with a misaligned riving knife.
It’s such a small difference, does it really matter?
When talking about thousandths of inches, the problem can appear negligible. However, in terms of joinery, .010” may as well be the Grand Canyon.
What do they do?
Changing from a full kerf blade to a thin kerf blade effectively changes the distance between the blade and the fence, resulting in a misaligned riving knife, and an inaccurate fence scale. BLADEMATCH Arbor Shims allow you to maintain a constant cut line, regardless of the blade’s kerf width. This keeps your fence scale reliable, and your riving knife in proper alignment.
Do I really need Arbor Shims?
If you use one saw blade for every cut, no. If you use a variety of blades for different types of cuts, absolutely.